Industrial Gates Industrial hinged gates By means of electro-hydraulic operators employing a fan cooled hydraulic pump and control unit we are able to reliably automate even the very large hinged gates. The first example below shows a pair of gates automated using two operators on each leaf. All types and any combination of access control may be used to activate the gates including radio transmitters, card readers, intercom system, coded keypad, push button, key-switch... We always advocate the use of appropriate safety equipment, usually induction loop detectors and/or photo-cells, these are usually arranged to prevent closure whilst a vehicle or other object is detected in the gate swing area.
Track sliding gate Automated by means of rack & pinion type sliding gate operator from our range of motors which will drive gates from 300Kg right up to 4000Kg and span up to 25metres. The second example below shows a 12 metre gate which will operate smoothly and quietly and with 100% duty cycle. All types and any combination of access control may be used to activate the gates including radio transmitters, card readers, intercom system, coded keypad, push button, key-switch... We always advocate the use of appropriate safety equipment, usually induction loop detectors and/or photo-cells, as well as safety edges as seen on the above example, which detect an object and can reverse the movement.
Cantilevered sliding gate The cantilevered gate is particularly useful when the entry to be protected is not a level area, or if it is necessary to install the gate without disturbance to the drive surface. The gates we offer are elegant, well finished, with optional colours and various opening widths and height options they are very well balanced, smooth and easy operate. The third example below shows a 7 metre gate which will operate smoothly and quietly and with 100% duty cycle.